
IBrake
Overview
IBrake is a current controlled drive circuit for spring and current pressure electromechanical disc brakes. In addition; With its brake health, early error detection and warning features, it enables higher safety and less labor/time loss in your system. By driving your brake with up to 40 times less loss than normal diodes, it prevents overheating as well as minimizing environmental damage and energy costs.
Differences of IBrake from other brake drivers:
- Current controlled braking
- Sensorless pad life detection
- Early fault detection-warning
- Competitive price
- High efficiency
- Remote control and monitoring
- Tension adjustment according to pad wear
- Optional features
Detailed Information
IBrake pad wear, coil insulation problems, torque reduction etc. Safer use is ensured by early detection of situations. Accidents and long maintenance/repair times can be avoided thanks to early and rapid fault detection. At the same time, energy savings, less heating and longer life are achieved with iBrake current-controlled brake driving. With remote control and monitoring, all brakes in your facility can be monitored remotely. Worn pads reduce braking performance is prevented by the intelligent driver.
Example comparison of iBrake and 8 Nm spring-loaded conventional diode brake driver
iBrake | Diyot | |
Tüketilen Güç (W) | 1.7W | 57W |
Sürekli Akım (mA): | 56mA | 335mA |
Max Akım (mA): | 101mA | 932mA |
Scope of application

